Convoy v3 • Open Source VPS Panel Using Proxmox • Open Beta • Free 512MB VPS (IPv6 Only)

135

Comments

  • AdvinAdvin Hosting Provider

    @warmingforg said:
    Seems buggy

    Can you PM me your customer email? Seems like an issue with the WHMCS integration

    Thanked by (1)mayiprint

    FroCDN Files - Anonymously upload up to 15GB per file for free with unlimited bandwidth. FroCDN Paste - Paste text to share with others, fork of Hastebin. Also completely free to use.

  • Your Order Number is: 3236753756

    really thx!

  • Sorry but I can't find IPv6 address anywhere.
    Not in the "Client Area", or the "New Dedicated Server Information" email.

    This is interesting.

    MicroLXC is lovable.

  • Doesn't look like the panel likes setting IPv6 nameservers:

  • @bliss said:
    Sorry but I can't find IPv6 address anywhere.
    Not in the "Client Area", or the "New Dedicated Server Information" email.

    This is interesting.

    you can find it in Convoy panel :p

    Thanked by (1)bliss
  • @Advin said:
    Should be fixed, stop/start the VPS. Sorry about that.

    ok now, thanks ;)

    Basic System Information:
    ---------------------------------
    Uptime     : 0 days, 0 hours, 1 minutes
    Processor  : Common KVM processor
    CPU cores  : 1 @ 3499.998 MHz
    AES-NI     : ❌ Disabled
    VM-x/AMD-V : ❌ Disabled
    RAM        : 473.4 MiB
    Swap       : 0.0 KiB
    Disk       : 9.8 GiB
    Distro     : Debian GNU/Linux 11 (bullseye)
    Kernel     : 5.10.0-21-amd64
    
    fio Disk Speed Tests (Mixed R/W 50/50):
    ---------------------------------
    Block Size | 4k            (IOPS) | 64k           (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 22.94 MB/s    (5.7k) | 336.22 MB/s   (5.2k)
    Write      | 22.95 MB/s    (5.7k) | 337.99 MB/s   (5.2k)
    Total      | 45.89 MB/s   (11.4k) | 674.21 MB/s  (10.5k)
               |                      |                     
    Block Size | 512k          (IOPS) | 1m            (IOPS)
      ------   | ---            ----  | ----           ---- 
    Read       | 431.35 MB/s    (842) | 465.17 MB/s    (454)
    Write      | 454.27 MB/s    (887) | 496.15 MB/s    (484)
    Total      | 885.62 MB/s   (1.7k) | 961.33 MB/s    (938)
    
  • In Reinstall Server section, Firefox recognizes the Template box as a username input, and shows a password manager box.
    If I press ESC to close the password manager, the dropdown menu disappears too.

    I see autocomplete="off" is already in place, so I don't know what's causing the problem.

    Webhosting24 aff best VPS; ServerFactory aff best VDS; Cloudie best ASN; Huel aff best brotein.

  • very nice and easy-to-use panel! and the VPS moves very well!!!! gg @Advin

  • @hotsnow said: you can find it in Convoy panel :p

    Thank you, but I don't know where Convoy panel is. Is this?

    Or here:
    2023.png

    MicroLXC is lovable.

  • @bliss said:
    Or here:
    2023.png

    yes, the bottom of your image, the link in the green part :p

    Thanked by (1)bliss
  • @hotsnow said: yes, the bottom of your image, the link in the green part :p

    Thank you, there it is. Can't believe I was so stupid.

    MicroLXC is lovable.

  • @bliss said:
    Sorry but I can't find IPv6 address anywhere.
    Not in the "Client Area", or the "New Dedicated Server Information" email.

    This is interesting.

    Same here.

  • GB5 Single Core 817

    Good job advin!

    YABS

    Wed Feb 22 05:27:35 UTC 2023
    
    Basic System Information:
    ---------------------------------
    Uptime     : 0 days, 0 hours, 0 minutes
    Processor  : Intel(R) Xeon(R) CPU E5-1650 v2 @ 3.50GHz
    CPU cores  : 1 @ 3499.998 MHz
    AES-NI     : ✔ Enabled
    VM-x/AMD-V : ✔ Enabled
    RAM        : 473.4 MiB
    Swap       : 1.2 GiB
    Disk       : 9.8 GiB
    Distro     : Debian GNU/Linux 11 (bullseye)
    Kernel     : 5.10.0-17-amd64
    
    fio Disk Speed Tests (Mixed R/W 50/50):
    ---------------------------------
    Block Size | 4k            (IOPS) | 64k           (IOPS)
      ------   | ---            ----  | ----           ----
    Read       | 23.43 MB/s    (5.8k) | 321.89 MB/s   (5.0k)
    Write      | 23.44 MB/s    (5.8k) | 323.58 MB/s   (5.0k)
    Total      | 46.87 MB/s   (11.7k) | 645.47 MB/s  (10.0k)
               |                      |
    Block Size | 512k          (IOPS) | 1m            (IOPS)
      ------   | ---            ----  | ----           ----
    Read       | 398.06 MB/s    (777) | 430.54 MB/s    (420)
    Write      | 419.21 MB/s    (818) | 459.21 MB/s    (448)
    Total      | 817.28 MB/s   (1.5k) | 889.75 MB/s    (868)
    
    iperf3 Network Speed Tests (IPv4):
    ---------------------------------
    Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping
    -----           | -----                     | ----            | ----            | ----
    Clouvider       | London, UK (10G)          | 801 Mbits/sec   | 493 Mbits/sec   | 19.8 ms
    Scaleway        | Paris, FR (10G)           | 763 Mbits/sec   | 525 Mbits/sec   | 15.6 ms
    NovoServe       | North Holland, NL (40G)   | 703 Mbits/sec   | busy            | 11.6 ms
    Uztelecom       | Tashkent, UZ (10G)        | 747 Mbits/sec   | 468 Mbits/sec   | 98.4 ms
    Clouvider       | NYC, NY, US (10G)         | 734 Mbits/sec   | 483 Mbits/sec   | 88.3 ms
    Clouvider       | Dallas, TX, US (10G)      | 779 Mbits/sec   | 479 Mbits/sec   | 124 ms
    Clouvider       | Los Angeles, CA, US (10G) | 750 Mbits/sec   | 475 Mbits/sec   | 147 ms
    
    iperf3 Network Speed Tests (IPv6):
    ---------------------------------
    Provider        | Location (Link)           | Send Speed      | Recv Speed      | Ping
    -----           | -----                     | ----            | ----            | ----
    Clouvider       | London, UK (10G)          | 922 Mbits/sec   | 922 Mbits/sec   | 19.8 ms
    Scaleway        | Paris, FR (10G)           | 924 Mbits/sec   | 924 Mbits/sec   | 15.6 ms
    NovoServe       | North Holland, NL (40G)   | 925 Mbits/sec   | 923 Mbits/sec   | 11.8 ms
    Uztelecom       | Tashkent, UZ (10G)        | 867 Mbits/sec   | 530 Mbits/sec   | 98.4 ms
    Clouvider       | NYC, NY, US (10G)         | 875 Mbits/sec   | 588 Mbits/sec   | 88.4 ms
    Clouvider       | Dallas, TX, US (10G)      | 846 Mbits/sec   | 304 Mbits/sec   | 124 ms
    Clouvider       | Los Angeles, CA, US (10G) | busy            | 401 Mbits/sec   | 145 ms
    
    Geekbench 5 Benchmark Test:
    ---------------------------------
    Test            | Value
                    |
    Single Core     | 817
    Multi Core      | 779
    Full Test       | https://browser.geekbench.com/v5/cpu/20711922
    
    YABS completed in 9 min 55 sec
    

    Convoy has a beautiful and clean UI, I want to try. Builtin xTerm.js is more comfortable than noVNC

  • @dosai said:

    @bliss said:
    Sorry but I can't find IPv6 address anywhere.

    Same here.

    Do you has the same problem like me ( ##Comment_130773)?

  • AdvinAdvin Hosting Provider

    @dosai said:

    @bliss said:
    Sorry but I can't find IPv6 address anywhere.
    Not in the "Client Area", or the "New Dedicated Server Information" email.

    This is interesting.

    Same here.

    IPv6 is in the control panel

    FroCDN Files - Anonymously upload up to 15GB per file for free with unlimited bandwidth. FroCDN Paste - Paste text to share with others, fork of Hastebin. Also completely free to use.

  • looks like the beta is working as people are reporting issues :)

    brilliant idea @Advin

    The all seeing eye sees everything...

  • AdvinAdvin Hosting Provider
    edited February 2023

    @terrorgen said:
    looks like the beta is working as people are reporting issues :)

    brilliant idea @Advin

    Yeah, it's been helpful
    Most of these issues have pretty much just been with the WHMCS module (rather than being Convoy related), I'll probably revise the WHMCS module in a few days and open source it soon. I'll also probably make a module for Advin Servers that integrates with our current platform and move some of our beta VPS over to Convoy.

    Thanked by (2)bliss warmingforg

    FroCDN Files - Anonymously upload up to 15GB per file for free with unlimited bandwidth. FroCDN Paste - Paste text to share with others, fork of Hastebin. Also completely free to use.

  • edited February 2023

    @Advin said:
    Most of these issues have pretty much just been with the WHMCS module (rather than being Convoy related), I'll probably revise it in a few days and open source it soon. I'll also probably make a module for Advin Servers that integrates with our current platform and move some of our beta VPS over to Convoy.

    Thank you for open source, wish for Proxmox VE + WHMCS + Convoy solutions.

  • edited February 2023

    Hi @Advin,

    • I have issue about RockLinux 9, cpu load 100% and cannot enter into terminal.
    • Change password in security with no affleck.

  • It's better to rename Account Password to Password or System (OS) Password, Account Password is ambiguous with WHMCS account password.

    Thanked by (2)adly Caxen
  • dosaidosai OG
    edited February 2023

    @warmingforg said:

    @dosai said:

    @bliss said:
    Sorry but I can't find IPv6 address anywhere.

    Same here.

    Do you has the same problem like me ( ##Comment_130773)?

    Yep.

    @Advin said:

    @dosai said:

    @bliss said:
    Sorry but I can't find IPv6 address anywhere.
    Not in the "Client Area", or the "New Dedicated Server Information" email.

    This is interesting.

    Same here.

    IPv6 is in the control panel

    This is what I see, not sure which IP to connect to.

    HGksegn.png

    Edit: ipv6 is pinging and working now.

  • Accessing GitHub is not easy, maybe it needs an ipv4.
    After reinstalling the system, I need to log in to vnc to restart, otherwise I cannot connect to the network.

  • edited February 2023

    Not quite sure if the "Used Bandwidth" is working properly, I always see 0 Bytes in the Convoy panel.

  • ewangewang Services Provider

    @spiritlhl said:
    Not quite sure if the "Used Bandwidth" is working properly, I always see 0 Bytes in the Convoy panel.

    This is an issue with data types. Convoy converts bytes to mebibytes and this process losses a lot of precision if the number is less than a mebibyte. Though, I will assess the impact of this precision and issue a patch if necessary.

    Founder, Lead Developer, Lead Designer, Marketing Lead, Sales Lead, Janitorial Staff, Plumber, Support Lead, Legal Team, I.T., Accountant, Electrician, System Administrator for Performave and ConvoyPanel

  • coldcold OG
    edited February 2023

    mine keeps freezing, and needed to be rebooted! twice today... @Advin

    i think its has something to do with the nameservers, NOT 100% sure

    its not !

  • @warmingforg said:

    @dosai said:

    @bliss said:
    Sorry but I can't find IPv6 address anywhere.

    Same here.

    Do you has the same problem like me ( ##Comment_130773)?

    log intro the panel, and you can find your ip there

  • Tried using the VM through the panel. Here is my observation:
    1. noVNC flashes every second on my computer, very annoying
    2. xterm.js response is very slow, like, I typed something into it, and it only shows what I have typed after a noticeable delay.
    3. Looks like they are on the output side of a virtual serial port, probably contributing to the issues above.
    4. Nano is garbled.
    5. Can't reach the router at fe80::1%eth0

    The all seeing eye sees everything...

  • @vyas said:
    image

    I also get this. I can be reproduced by the following:

    1. logging into the client portal https://clients.wynservers.com/index.php
    2. clicking on the "Launch Convory VPS SSO" button which opens up https://convoy.advinservers.com/.
    3. Then on the VPS control panel you click logout
    4. Click back button on your browser (I have only tried firefox).
    5. Finally click on "Launch Convory VPS SSO" button again and it will give the error.
Sign In or Register to comment.