[Clearance Sale] NAT VPS at COST + 5 x 256MB NAT VPS Bundle @ $15 !!

dinhvanlocitvn · March 2021

My order is #603fabfd1c882, Thanks @Abdullah !

deepak_leb · March 2021

Ordered.

AaronSS · March 2021

@sgheghele said:
I am pleasantly surprised by how well these NAT VPSs perform in first tests! Still have to find a good use case for them, but for the price I couldn't let these idlers escape.

I feel the same way

fragpic · March 2021

Is there a script to debloat the base template?
I know there is one to convert it to alpine but I don't want to switch from ubuntu.

yoursunny · March 2021

@fragpic said:
Is there a script to debloat the base template?
I know there is one to convert it to alpine but I don't want to switch from ubuntu.

My usual, for Debian 10:

echo 'APT::Install-Recommends "no";
APT::Install-Suggests "no";' >/etc/apt/apt.conf.d/80recommends
echo deb http://deb.debian.org/debian buster-backports main >/etc/apt/sources.list.d/buster-backports.list
apt-mark auto $(apt-mark showmanual)
apt update
apt install bind9-host curl git htop initramfs-tools iptables iputils-ping jq locales net-tools openssh-server patch resolvconf screen software-properties-common sudo systemd-sysv tcpdump telnet traceroute vim wget zip
apt autoremove --purge
apt full-upgrade

You'll need some changes for Ubuntu.

fragpic · March 2021

@Abdullah Thanks for the quick provisioning.
Also, passwords in plaintext is a big no no. Please don't save unencrypted passwords anywhere.

Abdullah · March 2021

@fragpic said:
@Abdullah Thanks for the quick provisioning.
Also, passwords in plaintext is a big no no. Please don't save unencrypted passwords anywhere.

yea, I need to correct that, Noted.

skorous · March 2021

@Aaron said:

@gms said:
Can Adguard home run on this NAT VPS with default ports?

Unfortunately no.

Technically he asked whether Adguard would run with the default ports ... which it likely will quite happily ( it just won't work on ipv4 ).

Ouji · March 2021

I think Miami is gone.

F

yoursunny · March 2021

@Ouji said:
I think Miami is gone.

MIA is MIA.

kuduku · March 2021

@Abdullah Bit the bullet , again and ....again

Abdullah · March 2021

@Ouji said:
I think Miami is gone.

F

Miami is back

OP had Miami link broken all the time!, didn't realize until now.

Abdullah · March 2021

@kuduku welcome!

A unrelated meme I came across internet ( @seriesn style ?)

seriesn · March 2021

@Abdullah said:
@kuduku welcome!

A unrelated meme I came across internet ( @seriesn style ?)

Memes are life ?

sgheghele · March 2021

@Abdullah said:

@antibomb said:

Hey, did you get it solved?
I think you will need to restart the vps after enabling fuse

@Abdullah
i tried refresh it by reinstall, reenabled the options in panel, reboot, but got another error
mount helper error: fusermount: fuse device not found, try 'modprobe fuse' first
Fatal error: failed to mount FUSE fs: fusermount: exit status 1
root@ubuntu:~# modprobe fuse
modprobe: FATAL: Module fuse not found in directory /lib/modules/3.10.0-1127.18.2.vz7.163.46

please create a ticket, so can look into your issue.

Having the same issue. Fuse is installed but the module is missing. Using Ubuntu 20.04 with the provided template.

Abdullah · March 2021

@sgheghele said:

@Abdullah said:

@antibomb said:

Hey, did you get it solved?
I think you will need to restart the vps after enabling fuse

@Abdullah
i tried refresh it by reinstall, reenabled the options in panel, reboot, but got another error
mount helper error: fusermount: fuse device not found, try 'modprobe fuse' first
Fatal error: failed to mount FUSE fs: fusermount: exit status 1
root@ubuntu:~# modprobe fuse
modprobe: FATAL: Module fuse not found in directory /lib/modules/3.10.0-1127.18.2.vz7.163.46

please create a ticket, so can look into your issue.

Having the same issue. Fuse is installed but the module is missing. Using Ubuntu 20.04 with the provided template.

Replied your ticket.

abskillz · March 2021

Hi Abdullah,

I have bought your VPS just while ago, but I have small issue. I have installed OpenVPN, it installed successfully, but the problem is openvpn app is connecting to it but internet not working afterwwards. Any solution please ??

elliotc · March 2021

@Abdullah said:

@gms said:
Can Adguard home run on this NAT VPS with default ports?

No, can't run a public adguard instance bcz. DNS port 53 is blocked. But a wayaround you can configure DNS-over-https, that should work.

Can also use a wireguard+adguard setup

Is it possible to do domain forwarding on port 853(DoT)?

Abdullah · March 2021

@abskillz said:
Hi Abdullah,

I have bought your VPS just while ago, but I have small issue. I have installed OpenVPN, it installed successfully, but the problem is openvpn app is connecting to it but internet not working afterwwards. Any solution please ??

Hi,

Can you access internet from inside the VPS (like try ping 1.1.1.1 from terminal)?

Just reinstall the OS & use this openvpn install script https://github.com/Nyr/openvpn-install enter one of your assigned ports when asked.
This script should work, as it always does.

Let me know.

ehab · March 2021

@Abdullah give him the fast internet man.

AaronSS · March 2021

Better yet use WireGuard

CaptainDuck · March 2021

@abskillz said:
Hi Abdullah,

I have bought your VPS just while ago, but I have small issue. I have installed OpenVPN, it installed successfully, but the problem is openvpn app is connecting to it but internet not working afterwwards. Any solution please ??

Probably port not open or using the wrong port?

abskillz · March 2021

@Abdullah said:

@abskillz said:
Hi Abdullah,

I have bought your VPS just while ago, but I have small issue. I have installed OpenVPN, it installed successfully, but the problem is openvpn app is connecting to it but internet not working afterwwards. Any solution please ??

Hi,

Can you access internet from inside the VPS (like try ping 1.1.1.1 from terminal)?

Just reinstall the OS & use this openvpn install script https://github.com/Nyr/openvpn-install enter one of your assigned ports when asked.
This script should work, as it always does.

Let me know.

Hi, Abdullah

I am installing from the same script that you mentioned above, when it is asking for IP address I am putting my IPV4 address, then port no: 18020 (my internal IP is eding with 180). for DNS I am using Google, UDP.. That how I am installing.

Pining is working fine even after installing OpenVPN on VPS

Abdullah · March 2021

@abskillz said:

@Abdullah said:

@abskillz said:
Hi Abdullah,

I have bought your VPS just while ago, but I have small issue. I have installed OpenVPN, it installed successfully, but the problem is openvpn app is connecting to it but internet not working afterwwards. Any solution please ??

Hi,

Can you access internet from inside the VPS (like try ping 1.1.1.1 from terminal)?

Just reinstall the OS & use this openvpn install script https://github.com/Nyr/openvpn-install enter one of your assigned ports when asked.
This script should work, as it always does.

Let me know.

Hi, Abdullah

I am installing from the same script that you mentioned above, when it is asking for IP address I am putting my IPV4 address, then port no: 18020 (my internal IP is eding with 180). for DNS I am using Google, UDP.. That how I am installing.

Pining is working fine even after installing OpenVPN on VPS

PM'd you, please make a ticket.

fragpic · March 2021

Has anyone been able to get wireguard working on their VPS?
I've been trying but it doesn't seem to work and I think it is because there is no UDP port forwarding support on them, since I only see the TCP option when using the Domain Forwarding setting.
@Abdullah
Am I doing something wrong or is this expected behavior?

Abdullah · March 2021

@fragpic said:
Has anyone been able to get wireguard working on their VPS?
I've been trying but it doesn't seem to work and I think it is because there is no UDP port forwarding support on them, since I only see the TCP option when using the Domain Forwarding setting.
@Abdullah
Am I doing something wrong or is this expected behavior?

I'm guessing that is India location, (using a different approach there - Domain Forwarding)
UDP ports need to be forwarded manually, by creating a ticket.

fragpic · March 2021

@Abdullah said: I'm guessing that is India location, (using a different approach there - Domain Forwarding) UDP ports need to be forwarded manually, by creating a ticket.

Yes. Raising a ticket now.

kuduku · March 2021

@fragpic said:
Has anyone been able to get wireguard working on their VPS?
I've been trying but it doesn't seem to work and I think it is because there is no UDP port forwarding support on them, since I only see the TCP option when using the Domain Forwarding setting.
@Abdullah
Am I doing something wrong or is this expected behavior?

I have 2 NAT VPS working on NL and SG locations
Had used @Nyr scripts on them . No issues faced

Abdullah · March 2021

@fragpic said:

@Abdullah said: I'm guessing that is India location, (using a different approach there - Domain Forwarding) UDP ports need to be forwarded manually, by creating a ticket.

Yes. Raising a ticket now.

I have replied your ticket. On these NAT VPS, ports are assigned according to the internal IP. I hope that works

kuduku · March 2021

@Abdullah said:

@fragpic said:

@Abdullah said: I'm guessing that is India location, (using a different approach there - Domain Forwarding) UDP ports need to be forwarded manually, by creating a ticket.

Yes. Raising a ticket now.

I have replied your ticket. On these NAT VPS, ports are assigned according to the internal IP. I hope that works

Any issues in network
VPS has gone down 4 times in last 40 minutes for 11 minutes
Any maintenance ?
Edit - Only ipv6 went down not NAT ipv4

[Clearance Sale] NAT VPS at COST + 5 x 256MB NAT VPS Bundle @ $15 !!

Comments